|
Select a collection below to view all of the swatches from that collection.
Engineered • Acrylic Impregnated • Prefinished • Hardwood Flooring
Gammapar is pleased to announce the debut of our newest line of wood flooring, Jefferson Collection III. Advancing the concepts inherent in our engineered, acrylic-impregnated hardwood line, Jefferson Collection III offers an impressive range of species, a wide variety of colors and a varied selection of formats — one of the most exciting collections available to the professional designer today. At the same time as being fashionably current, Jefferson Collection III is also technologically progressive. The robust (5/12” thick) multi-ply construction affords exceptional dimensional stability. The unique acrylic impregnation process increases hardness by up to 300 percent, providing for superior performance (particularly in commercial applications) and outlasts conventional wood flooring many times over. The “finishing touch” is Pedestrian™, Jefferson Collection III’s UV-cured urethane system, which not only contains aluminum oxide and ceramic components for additional durability and enhanced scratch resistance, but also has antimicrobial agents that reduce the incidence of bacterial growth on the installed floor surface. Manufactured in the U.S.A. Ash, Cherry, Maple, Radiata Pine, Red Oak

Engineered • Acrylic Impregnated • Prefinished • Reclaimed Hardwood Flooring
The Americana Collection uses historically reclaimed wood, up to 200 years old, from a variety of sources such as barns, warehouses, primitive cabins and more, providing you with an opportunity to access extinct or endangered wood species. Many of the reclaimed products in this line even come with a brief history of the structures from which they originated. The wear surface of The Americana Collection features an impregnated sawn or rotary cut veneer face, depending on the source material, and is recommended for both commercial and residential applications. The Americana Collection is available in natural oil or UV-cured polyurethane finishes and is guaranteed to be free of insect infestation. Each flooring piece’s tightly engineered tongue and groove sides and fully matched ends are precision milled with micro-bevel edges to subtly define each plank. The standard finish is satin Pedestrian™ Urethane, a durable, scratch-resistant system. As an added benefit, an antimicrobial agent is dispersed throughout the finish. The recommended adhesive is Nydree Group's UP-28™ as supplied by Gammapar. Finished flooring should be cleaned and buffed 16 to 48 hours after installation is completed using Pedestrian™ Cleaner. Prior to installation, the subfloor must be tested for moisture using calcium chloride moisture test kits (1 kit per 1,000 sq. ft.). The results will determine the appropriate Gammapar moisture barrier to be used, if any. Moisture test results should be recorded in the job file and reported to the owner. It is essential to check the levelness of the subfloor before starting installation. The subfloor should also be tested for the presence of curing agents and other sealants that can cause adhesive bonding problems. Manufactured in the U.S.A. Reclaimed Oak, Poplar, Yellow Pine

Engineered • Acrylic Impregnated • Prefinished • Exotic Hardwood Flooring
Our Exotics Collection is proof that unusual wood doesn't need an unusually high amount of upkeep. The extraordinary wood in this collection comes from Honduras, Spain, Africa and a host of other exotic locales. The durability, however, comes straight from Gammapar. Our Exotics Collection strip and plank flooring's wear layer face is sawn cut or rotary cut and is impregnated using methylmethacrylate monomer (liquid plastic) and is then polymerized throughout the thickness of the wear layer by a proprietary process. The thickness of the wood face veneer is 1/10" (nominal) and is processed for hardness (PSI) and durability (scratch and abrasion resistance). The 1/10" wear layer is bonded to a multi-ply hardwood substrate. Flooring shall be 2 2/3" or 4" (wide) x 3/8" (thickness) x 12" — 47" (random lengths) installed and finished in accordance with instructions and adhesives as supplied by Gammapar. Each flooring piece’s tightly engineered tongue and groove sides and full matched ends are precision milled with micro-bevel edges to subtly define each plank. The standard finish is satin Pedestrian™ Urethane, a durable, scratch-resistant system. As an added benefit, an antimicrobial agent is dispersed throughout the finish. The recommended adhesive is Nydree Group's UP-28™ as supplied by Gammapar. Finished flooring should be cleaned and buffed 16 to 48 hours after installation is completed using Pedestrian™ Cleaner. Prior to installation, the subfloor must be tested for moisture using calcium chloride moisture test kits (1 kit per 1,000 sq. ft.). The results will determine the appropriate Gammapar moisture barrier to be used, if any. Moisture test results should be recorded in the job file and reported to the owner. It is essential to check the levelness of the subfloor before starting installation. The subfloor should also be tested for the presence of curing agents and other sealants that can cause adhesive bonding problems. Manufactured in the U.S.A. African Mahogany, Andiroba, Canary, Jatoba, Radiata Pine, Santos Mahogany

Engineered • Acrylic Impregnated • Prefinished • Bamboo Flooring
By adding acrylic, we made bamboo as durable as it is beautiful. By adding color, we made it adaptable to just about any décor. GammaBamaBoo Bamboo flooring is impregnated using methylmethacrylate monomer (liquid plastic) and is then polymerized throughout the thickness of the wear layer by a proprietary process. The thickness of the wood face veneer is 1/10" (nominal) and is processed for hardness (PSI) and durability (scratch and abrasion resistance). The 1/10" wear layer is bonded to a multi-ply hardwood substrate. Flooring shall be 2 2/3" or 4" (wide) x 3/8" (thickness) x 12" — 47" (random lengths) installed and finished in accordance with instructions and adhesives as supplied by Gammapar. Each flooring piece’s tightly engineered tongue and groove sides and full matched ends are precision milled with micro-bevel edges to subtly define each plank. The standard finish is satin Pedestrian™ Urethane, a durable, scratch-resistant system. As an added benefit, an antimicrobial agent is dispersed throughout the finish. The recommended adhesive is Nydree Group's UP-28™ as supplied by Gammapar. Finished flooring should be cleaned and buffed 16 to 48 hours after installation is completed using Pedestrian™ Cleaner. Prior to installation, the subfloor must be tested for moisture using calcium chloride moisture test kits (1 kit per 1,000 sq. ft.). The results will determine the appropriate Gammapar moisture barrier to be used, if any. Moisture test results should be recorded in the job file and reported to the owner. It is essential to check the levelness of the subfloor before starting installation. The subfloor should also be tested for the presence of curing agents and other sealants that can cause adhesive bonding problems. Manufactured in the U.S.A. Natural Vertical and Horizontal Bamboo, Carbonized Vertical and Horizontal Bamboo

Engineered • Acrylic Impregnated • Prefinished • Hardwood Flooring
Long favored by designers for its open grain pattern and consistent natural variations, The Jefferson Collection Type 2 provides the beautiful appearance of traditional wood flooring for use in both commercial and residential applications. Each flooring piece’s tightly engineered tongue and groove sides and full matched ends are precision milled with micro-bevel edges to subtly define each plank. The standard finish is satin Pedestrian™ Urethane, a durable, scratch-resistant system. As an added benefit, an antimicrobial agent is dispersed throughout the finish. The recommended adhesive is Nydree Group's UP-28™ as supplied by Gammapar. Finished flooring should be cleaned and buffed 16 to 48 hours after installation is completed using Pedestrian™ Cleaner. Prior to installation, the subfloor must be tested for moisture using calcium chloride moisture test kits (1 kit per 1,000 sq. ft.). The results will determine the appropriate Gammapar moisture barrier to be used, if any. Moisture test results should be recorded in the job file and reported to the owner. It is essential to check the levelness of the subfloor before starting installation. The subfloor should also be tested for the presence of curing agents and other sealants that can cause adhesive bonding problems. Constructed for durability with a rotary cut veneer wear surface, The Jefferson Collection Type 2 is covered by our Lifetime Limited Wear Warranty and is available in your choice of natural oil or UV-cured polyurethane finishes. Manufactured in the U.S.A. Ash, Maple, Red Oak

Engineered • Acrylic Impregnated • Prefinished • Hardwood Flooring
Setting the standard for wood flooring products, the durable Olympia Collection carries our Lifetime Limited Wear Warranty. Made with an impregnated sawn veneer face, the wear surface of this collection features a tighter grain pattern to closely match the appearance of traditional wood flooring. Each flooring piece’s tightly engineered tongue and groove sides and full matched ends are precision milled with micro-bevel edges to subtly define each plank. The standard finish is satin Pedestrian™ Urethane, a durable, scratch-resistant system. As an added benefit, an antimicrobial agent is dispersed throughout the finish. The recommended adhesive is Nydree Group's UP-28™ as supplied by Gammapar. Finished flooring should be cleaned and buffed 16 to 48 hours after installation is completed using Pedestrian™ Cleaner. Prior to installation, the subfloor must be tested for moisture using calcium chloride moisture test kits (1 kit per 1,000 sq. ft.). The results will determine the appropriate Gammapar moisture barrier to be used, if any. Moisture test results should be recorded in the job file and reported to the owner. It is essential to check the levelness of the subfloor before starting installation. The subfloor should also be tested for the presence of curing agents and other sealants that can cause adhesive bonding problems. Suitable for high-traffic commercial use or residential settings, The Olympia Collection comes finished in natural oil or UV-cured polyurethane. Manufactured in the U.S.A. Ash, Cherry, Jatoba, Oak, Pine, Walnut

Engineered • Acrylic Impregnated • Prefinished • Hardwood Composite Flooring
Perfecting nature, while at the same time protecting it. Gammapar has been combining the natural beauty of wood with the latest in flooring technology for over forty years. And to make sure we'll be able to do it for many more years, we're committed to using our precious resources responsibly. Which is why the flooring in our COR Collection comes from completely sustainable forests and uses only all-natural dyes. So whether you choose COR for its unbeatable value, unmatched durability, or striking color palette, you'll know you're getting something special. The COR™ Collection engineered acrylic impregnated wood flooring is manufactured by Gammapar, located in Forest, VA, USA. The wear layer is a sawn cut veneer made from extruded whole tree wood fibers, and is impregnated using methylmethacrylate monomer (liquid acrylic) and is then polymerized throughout the thickness of the wear layer by a proprietary process. The thickness of the wood face veneer is 1/10" (nominal) and is processed for hardness (psi) and durability (scratch and abrasion resistance). The 1/10" wear layer is bonded to a multiply hardwood substrate. Flooring shall be 4" wide by 3/8" thick by random lengths (12" - 46 1/2") and is installed and finished in accordance with instructions and adhesives as supplied by Gammapar. Each flooring piece’s tightly engineered tongue and groove sides and full matched ends are precision milled with micro-bevel edges to subtly define each plank. The standard finish is satin Pedestrian™ Urethane, a durable, scratch-resistant system. As an added benefit, an antimicrobial agent is dispersed throughout the finish. The recommended adhesive is Nydree Group's UP-28™ as supplied by Gammapar. Finished flooring should be cleaned and buffed 16 to 48 hours after installation is completed using Pedestrian™ Cleaner. Prior to installation, the subfloor must be tested for moisture using calcium chloride moisture test kits (1 kit per 1,000 sq. ft.). The results will determine the appropriate Gammapar moisture barrier to be used, if any. Moisture test results should be recorded in the job file and reported to the owner. It is essential to check the levelness of the subfloor before starting installation. The subfloor should also be tested for the presence of curing agents and other sealants that can cause adhesive bonding problems. At the heart of our COR Collection is a very important goal: to provide environmentally responsible wood flooring without sacrificing the quality and elegance of real wood. One look at our samples will tell you we succeeded. Manufactured in the U.S.A. Extruded "Whole Tree" Wood Fibers

|